LUCI Knowledge Base

Add / Edit station

By choosing Add / Edit station you will see the dialog for setting up a new station, or changing the selected station.

Your new station will at first use the same settings as the currently loaded station.

name : Fill in the name of your station. Always start by giving the new station a name, otherwise it will not be saved. In this case we will name it Studio 1 and alter the settings.

protocol : The following supported protocols can be set:

RTP: send and receive a symmetric RTP stream with integrated signalling.
SIP: You can use SIP in combination with G722 to connect to standard VOIP equipment, or ULCC for a high quality connection to LUCI STUDIO.

destination : The connection details of the server/studio codec.

For protocol RTP
Use an IP-address or URL, combined with a : and the IP port number,
examples: or
For Protocol SIP *
Use CODEC@SIPSERVER or CODEC (when there is no SIPserver) where SIPSERVER is the URL or IP-address of the SIPserver.
examples: or 102409@ or

stun : Only valid for the SIP protocol, when needed.
Use an IP-address or URL.
examples: or

default : Only valid for the SIP protocol, when needed. Switch on if you want to use the credentials of the default user that you have set in ‘Options > SIP > Defaults’

user : Your username is the name you use to login at your server. Only fill in username if you want to log in to a SIP.

password : Your password is your personal log on credential belonging to your username. Passwords are used only together with usernames for logging in to SIP.

jitter buffer : Default value 100 ms (WiFi) / 200 ms (3G). Supported buffer length WiFi and 3G: 10 ms to 500 ms. This is the jitter buffer that LUCI uses for the RETURN stream. This will NOT have any influence on the outgoing stream to the studio.

jitter buffer Dyn. : This is a setting that you can choose so the software determines the buffer that is needed to get a drop free connection automatically while you are streaming. It takes the normal jitter buffer setting ( say 50 ms ) as the lowest possible, and the Jitter Buffer Dyn. setting ( say 200 ms ) as the possible range ( so buffer automatically set is between 50 and 250 msec ). 0 ms will set this feature off.

format : Select here one of the following audio codec formats for the outgoing stream to the studio:
G.722 Mono
ULCC Mono or Stereo

bitrate : Default value is set on 64 kbps. Set the bitrate of the codec format you select.
For the outgoing stream.
Supported bitrates depend on the chosen codec.

sample rate : Default value 48KHz. Set Sample-rate of the codec format you selected for the outgoing stream.

Overview for the supported codecs and bitrates
G.722 mono > 64 kbps ULCC mono > 252 kbps ULCC stereo > 492kbps
Open Support Ticket
Terms & Conditions
Privacy Policy

© Technica Del Arte 2024